Configuring Mac OS X For RadixNET
                      ---------------------------------


1) Begin by clicking the Apple icon in the top left corner of the screen 
   and select "System Preferences" and a new window will open.

2) Once you have opened the "System Preferences" window, double-click the
   "Network" icon to open another window.

3) Click on the tab labelled "PPP" to bring foward the PPP menu options.

4) In the "Service Provider" field you can put in RadixNet, or another name
   of your choice, this is only a label for the profile.

5) In the "Phone Number" type in the full number of the access number you 
   wish to use. 

   You can put another access number in the "Alternate Number" field, but 
   make sure both numbers you are using use the same login procedure.

6) In "Account Name" put in your RadixNet username, in all lower case 
   letters.  You can put your password in the "Password" field, which will
   only appear as dots.  If you put a checkmark in the "Save password" 
   option then your computer will put in your password for you 
   automatically

7) Click on the "PPP Options" button at the bottom of the current window to
   open another window.  Under "Session options, set these items as you see    
   fit.  It is recommended to place a checkmark next to "Connect
   Automatically when starting TCP/IP applications."

8) Click "OK" at the bottom, and then click "Save", 

9) Now click the "TCP/IP" tab.  Make sure that the "Configure" option is 
   set for "Using PPP." 

10) Inside the "Domain Name Servers" box, put in the RadixNet DNS servers:

		207.192.128.35
		207.192.128.36

11) Click "Save."

The setup process is now complete.


Email and News Settings
----------------------

Use the following settings to configure your email software:

   Incoming Mail (Pop3 Server): pop.radix.net
   Use your RadixNet userid and password to login to this server.


   Outgoing Mail (SMTP Server): mail1.radix.net
   A userid is not required for this server.

   News Server (NNTP Server): news.radix.net
   A userid is not required for this server.


Using Mac OS X To Dial RadixNet
---------------------------------

1) Open your application to connect to the Internet, and the computer 
   will ask you if you want to connect.

2) The modem should dial RadixNet and connect. 

4) Type your username at the "username:" prompt, and hit the "Enter" key.

5) Type your password at the "password:" prompt, and hit the "Enter" key.

6) After a moment, if you have correctly typed your username and 
   password, the terminal screen will disappear, and you will be connected.

7) You should now be able to use all of your Internet software, such as 
    Netscape, Eudora, etc.