RadixDSL Basic Configuration Instructions


Plug DSL modem into your computer's 10BaseT LAN port (LAN cable supplied).


Plug your DSL phone jack into the DSL modem (phone cable supplied).


NOTE: If you have telephones on the same line as your DSL, you will need 
to install a DSL Line Filter (one included) for each. Simply unplug the 
phone line at the jack, plug the line filter into the jack, plug the phone 
back into the filter.


Plug in transformer, connect and power on the DSL modem. Wait for synch. 
The "Power" and "Ready" LEDs will be steady green.


Configure TCP/IP associated with the LAN card:

Your IP Address:	_____(provided by RadixNet)______________________

Your Netmask:		_____(provided by RadixNet)______________________

Default Gateway:	_____(provided by RadixNet)______________________

DNS (Primary):  	_____(provided by RadixNet)______________________

DNS (Secondary):	_____(provided by RadixNet)______________________


Please also feel free to contact RadixNet Tech Support (301-567-9831, 
800-309-5254, 800-334-7474) with any questions or if you need assistance!